PROFILE:
HSE Upstream and
Downstream Design
|
 |
 |
 |
2009–2010 TurkmenGaz
South Yoloten Gas Field
Internal PMC role in
FEED for 20BCMA processing of sour gas, then in-country coordination with client
and other EPC contractors working on the same field. Provided input and
guidance on HSE philosophies and Environmental Impact Assessment. Developed
project-specific field map with risk zones, land allocation
2008–2009 Borger
Gasoline Benzene Reduction
Systems Area Lead for multiple units, including
major heat integration for distillation areas. Responsibilities included incorporating
PHA into IFD release, integrating with LOPA/SIL decisions,
“Management of Change” through to IFC.
2008 ExxonMobil
Odoptu Development
–
HSE lead for oil& gas processing, produced
water re-injection & pipeline. Conducted studies in
pre-FEED optimization for fire protection, fire & gas detection, HVAC,
Blast, Noise, RAM and Winterization. Responsible for closing PHA action
items from HAZOP, detailed design & procurement of fire protection systems,
fire and gas detection systems. Had lead role in 3D-model
review for fire engine access, employee escape routes, blast panels and P.A.
locations.
2007
ADMA-OpCo
HAP platform, Umm Schaif Field
Lead for all HSE
deliverables on gas processing platform for sour, wet natural gas. Supervised third-part contracts for HSEIA, QRA, HAZOP and SIL.
Worked closely with PMC firm on strategy for fire protection,
hazard detection and SIL.
2007
Did sizing and hydraulics for unit-level OWS system
capacity to handle equipment loss of containment plus 10-year rain storm.
Worked
with Piping on 3D model for underground to ensure no conflicts with storm sewer
or fire main.
2006
Giant Refinery,
Ran “FlareNet” model for extension of new 18” flare
header into existing 24” to flare knockout, and a case study for their coldest
day to ensure no condensation in the event of a C4/C5 mix release to flare from
loss of column reflux.
2005-2006 BP Refinery,
In process study for Canadian extra heavy crude oil, used “PI” historian to establish annual mean,
maximum and seasonal variations. Evaluated existing flares for new/modified
units, demonstrated a third flare would be required.
1998-2005
Environmental
Protection Agency
Supported
contractor Work Assignment Managers in EPA Oil Spill program on mitigation
options for storage systems. Was expert reviewer of SPCC technical
guidance to P.E’s and updated “Lessons Learned” in Gas STAR program.
1993-1995
Mobil R&D Corporation
Chaired API’s Refinery MACT subcommittee for storage
tanks, on external seal/internal floater design options..
Also developed API’s two-day training materials about
Refinery MACT. As an industry rep to US EPA’s Emission Inventory
Improvement Program worked with their developer of “TANKS” software to extend
its capability to more tank designs.
1977–1981
PetroUnited Terminals, Bayport & Texas City
Master-planning &
Permits for specialty chemical storage, marine load/unload and design of
wastewater treatment.
1976–1978
Intercontinental Terminals,
•
Treatment
of dilute chemical wastewater with large equalization pond and a trickling
filter
•
Developed
emissions inventory software for entire tank farm, marine, rail & truck
loading
